Airbag Resetting and Anti-Theft Code Reader

Introduction When an explosion occurs in an airbag or the SRS light is turned on accidentally, commonly the airbag controller should be replaced since the traditional tools cannot clear the trouble code. Actually, the controller can be used normally again after the trouble code is cleared, if there is no damage to the controller hardware. This item is used to reset the airbag. Functions Airbag resetting Anti-theft code reader Features Big display screen, quick and convenient. Read/write and save the memory of the airbag currently not supported. VW airbags can be restored by K-line and OBDII line. Applicable Vehicles for IMMO Code Reader Applicable to the following Volkswagen/AUDI vehicles. AUDI A6/V6 AUDI A6/V6 BACK AUDI A6/C5 D03 AUDI A6/C5 D04-D09 STA2000 POLO (6Q0920800) PASSAT B5 1.8 PASSAT B5 1.8T BORA (6A, 6B) (1J5920806B, 1J5920826A) BORA (5A, 5B) (1J5920805B, 1J5920825A)

£599.99 << Back to Airbag Reset Tools

Resetting Vehicles not Listed

This is a very important feature! There are so many airbag models in the world that it is impossible to get airbag data for all airbag models. With this function, user can perform airbag resetting for most vehicles not listed in the above table by the following simple steps. This function is applicable to vehicles use chip model 93C46, 93C56, 93C66, 24C01A, 24C04, 24C08, 25160, 25320, 95080, and nonstandard 93C46.

• To reset an airbag not listed in the above table, you just need to find a good airbag with same type;

• Install the good airbag chip onto the adapter, and connect the adapter to this item;

• Select chip type and press F1 key. This item will read and save the data of the good airbag chip automatically;

• Take out the good airbag chip and insert the crashed airbag chip onto the adapter, and then press F2 key. This item will write the stored data into the crashed airbag chip automatically.